.png)
Hydraulic balancing
according to method B
Optimum heat distribution in the building by calculating the required flow rates. Save up to 12 hours per project!
You'll be in good company.
An excerpt of the companies that work with autarc on a daily basis.
Inclusion of inventory valves
When recording existing heating areas, it is also possible to add an existing valve.
The advantage of this is that you will receive the setting value directly at the end.
If you want to keep the existing valve in the system and don't want to replace it.
The advantage of this is that you will receive the setting value directly at the end.
If you want to keep the existing valve in the system and don't want to replace it.
Wide range of valves and manufacturers
Our software automatically determines the optimal flow for the radiator, based on the flow and return temperature set by you. You will then directly receive the setting value displayed for the pressure-dependent or pressure-independent valve you have selected.
Choose the optimal system spread for you
You will receive all values based on the spread you choose. Regardless of whether it is underfloor heating or a radiator, the system delivers the right value directly to the customer on site.
Oops! There seems to be an incorrect input.
“Since we started using autarc, we no longer drive out to every customer. By qualifying leads with the heat pump check, we only engage with customers who are genuinely interested in a heat pump."
Philip Walter
Managing Director
Thomas Mehner Haustechnik
100% DIN compliant
We comply with all standards in our calculations
24/7 available
Accessible from all devices throughout the year
Personal contact
We take time to answer your concerns, no question remains unanswered
English
PRODUCTS
INTEGRATIONS
SOCIAL MEDIA
SOLUTIONS